Linux 7 Multicast Configuration: Difference between revisions
Jump to navigation
Jump to search
Line 31: | Line 31: | ||
displays multicast group membership information for IPv4 and IPv6. Optionally use -n to prevent DNS lookups (faster). | displays multicast group membership information for IPv4 and IPv6. Optionally use -n to prevent DNS lookups (faster). | ||
The same information can be obtained from /proc: | |||
<pre> | |||
cat /proc/net/dev_mcast | |||
cat /proc/net/igmp | |||
cat /proc/net/igmp6 | |||
</pre> | |||
==Ping== | ==Ping== |
Revision as of 16:50, 21 March 2017
Internal
Concepts
Procedure
Multicast at Kernel Level
Make sure multicast is enabled at kernel level.
To compile multicast support into the kernel, CONFIG_IP_MULTICAST must be present in the kernel configuration file.
Multicast Support at Interface Level
- Verify that the network interface you plan to use for multicast traffic has multicast enabled, and if not, turn it on.
- Configure multicast routing: Configure Multicast Routing
- If iptables runs on the system, allow multicast traffic for the interface that will handle multicast traffic: Configure iptables to allow Multicast
- Test it. For more details see the Troubleshooting section.
Troubleshooting
Display Multicast Group Membership Information
netstat -g
displays multicast group membership information for IPv4 and IPv6. Optionally use -n to prevent DNS lookups (faster).
The same information can be obtained from /proc:
cat /proc/net/dev_mcast cat /proc/net/igmp cat /proc/net/igmp6
Ping
Send Multicast Traffic
See
Organizatorium
TODO http://lartc.org/howto/lartc.multicast.html
echo 1 > /proc/sys/net/ipv4/ip_forward