Provision Docker Storage on a Dedicated Block Device: Difference between revisions

From NovaOrdis Knowledge Base
Jump to navigation Jump to search
Line 17: Line 17:
The procedure will create a /dev/sdb1 partition.
The procedure will create a /dev/sdb1 partition.


<pre>
[[Wipefs#Erase_all_Signatures|Erase all signatures]] from the partition.
wipefs -a /dev/sdb1
</pre>




Initialize the partition for use by LVM:
pvcreate /dev/sdb1




Revision as of 02:55, 23 May 2017

Internal

Overview

Procedure

Provision an unformatted block device. For this example, it will be referred to as /dev/sdb.

Create the Partition

Create one partition that spans the entire device. Either fdisk or sfdisk can be used.

Creating a Partition that Spans the Entire Device with fdisk

The procedure will create a /dev/sdb1 partition.

Erase all signatures from the partition.


Initialize the partition for use by LVM:

pvcreate /dev/sdb1




Verify your configuration. You should have a dm.thinpooldev value in the /etc/sysconfig/docker-storage file and a docker-pool logical volume: 

# cat /etc/sysconfig/docker-storage
DOCKER_STORAGE_OPTIONS=--storage-opt dm.fs=xfs --storage-opt
dm.thinpooldev=/dev/mapper/docker--vg-docker--pool

# lvs
  LV          VG   Attr       LSize  Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  docker-pool rhel twi-a-t---  9.29g             0.00   0.12

Before using Docker or OpenShift Container Platform, verify that the docker-pool logical volume is large enough to meet your needs. The docker-pool volume should be 60% of the available volume group and will grow to fill the volume group via LVM monitoring.

Retrieved from "https://kb.novaordis.com/index.php?title=Provision_Docker_Storage_on_a_Dedicated_Block_Device&oldid=22565"