Revision as of 15:34, 26 June 2017

External

This article explains how to expose a pre-formatted block device partition as storage pool, using virsh.

Do not use this procedure to configure an entire disk as storage pool. Follow this procedure for that Disk-based Storage Pool Configuration.

Create a new partition to be exposed as the local storage pool. Use fdisk. For this example, the partition will be referred to as /dev/sda7.

Create a file system on the newly allocated partition, as described in mkfs.xfs or mkfs.ext4:

mkfs.xfs /dev/sda7

Create a new storage pool definition:

virsh pool-define-as main-storage-pool fs --source-dev /dev/sda7 --target /main-storage-pool

More details on the pool-define-as command in virsh pool-define-as.

Verify the new pool:

virsh pool-list --all

 Name                 State      Autostart
-------------------------------------------
 main-storage-pool    inactive   no

More details on the pool-list command in virsh pool-list.

@@ Line 29: / Line 29: @@
 </pre>
-More details on the pool-define-as command inL [Virsh pool-define-as|virsh pool-define-as].
+More details on the pool-define-as command in [[Virsh pool-define-as|virsh pool-define-as]].
 Verify the new pool:
@@ Line 41: / Line 41: @@
 </pre>
-More details on the pool-list command inL [Virsh pool-list|virsh pool-list].
+More details on the pool-list command in [[Virsh pool-list|virsh pool-list]].