HTTP Persistent Connections: Difference between revisions
| Line 14: | Line 14: | ||
=Overview= | =Overview= | ||
By ''connection'', we understand the TCP/IP connection opened between a HTTP client and a HTTP server. Prior to the introduction of the persistent connections by HTTP/1.1, there was no official specification on how to establish and maintain persistent connections. In most cases, a separate TCP connection was established to fetch each URL. This article assumes HTTP/1.1 and it ''does not'' apply to HTTP/1.0. | By ''connection'', we understand the TCP/IP connection opened between a HTTP client and a HTTP server. Prior to the introduction of the persistent connections by HTTP/1.1, there was no official specification on how to establish and maintain persistent connections. In most cases, a separate TCP connection was established to fetch each URL. This article assumes HTTP/1.1 and it ''does not'' apply to HTTP/1.0. This is how [[HTTP/1.0 Persistent Connections|persistent connections are negotiated in HTTP/1.0]]. | ||
{{Warn|A ''HTTP persistent connection'' is a connection that can be used for sending of more than one request/response sequence. In HTTP/1.1, persistent connection is the default behavior.}} | {{Warn|A ''HTTP persistent connection'' is a connection that can be used for sending of more than one request/response sequence. In HTTP/1.1, persistent connection is the default behavior.}} | ||
Revision as of 05:28, 8 January 2017
External
- RFC 2616 - Connections https://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html
- Wikipedia - Persistent Connections https://en.wikipedia.org/wiki/HTTP_persistent_connection
- HTTP Keepalive http://web.archive.org/web/20100813132504/http://www.io.com/~maus/HttpKeepAlive.html
- Akamai Support of Persistent Connections https://community.akamai.com/thread/1192
- O'Reilly HTTP: The Definitive Guide - Persistent Connections https://www.safaribooksonline.com/library/view/http-the-definitive/1565925092/ch04s05.html
Internal
Overview
By connection, we understand the TCP/IP connection opened between a HTTP client and a HTTP server. Prior to the introduction of the persistent connections by HTTP/1.1, there was no official specification on how to establish and maintain persistent connections. In most cases, a separate TCP connection was established to fetch each URL. This article assumes HTTP/1.1 and it does not apply to HTTP/1.0. This is how persistent connections are negotiated in HTTP/1.0.
A HTTP persistent connection is a connection that can be used for sending of more than one request/response sequence. In HTTP/1.1, persistent connection is the default behavior.
Measurements of actual HTTP/1.1 connections had shown that persistent connections are preferable, for several reasons: resources (CPU time, memory, and network bandwidth) are saved on routers and hosts by opening and closing fewer TCP connections, network congestion is reduced by eliminating the packets caused by TCP open, latency on subsequent requests is reduced since there is no time spent in TCP's connection opening handshake. This last point is even more important in the case of SSL connections. Persistent connections can be used to pipeline requests.
Persistent connections may also present disadvantages, for heavily loaded servers by clients that stay idle for a long time. That is why implementing timeout on persistent connections is important. The higher the timeout, more server processes will be kept occupied waiting on connections with the idle clients.
Client/Origin Server Connection
Both HTTP/1.1 client and server implementation must implement persistent connections, and assume persistent connections are the default. The client must assume that the server will maintain a persistent connection, even after an error response. The server must assume that the client that opened a connection intends to maintain it, unless a "Connection: close" header was sent with the request. Naturally, in order to remain persistent, all messages on the connection must have a self-defined message length, declared as value of the Content-Length header, and not one defined by the closure of the connection.
Both the client and the server may chose to close the underlying TCP connection, by signaling that with the use of the Connection header. If the client intends to close the connection after sending a request, it must include the "Connection: close" header in the request:
Connection: close
If the server chooses to close the connection after sending a response, it must include the "Connection: close" header in the response. However, a server should not close the connection while in the middle of transmitting a response.
Once the connection has been signaled as "closed", none of the parties must send any more requests/responses on that connection: the request or response that was used to send the header becomes the last one for that connection.
Connection via a Proxy
HTTP/1.1 proxy implementation must implement persistent connections, and assume persistent connections are the default.
From the proxy's perspective, the connection with the client and the connection with the origin server are handled independently: each persistent connection signaling with "Connection" header applies to only one transport link. If a proxy receives a request with a "Connection: close" header, it must not be communicated by the proxy over further connections.
Timing Out a Persistent Connection
Persistent connections maintained by long-time idle clients change from resource-savers into a resource wasters. That is why the servers must monitor persistent connection to detect idle-ness and close a persistent connected after a certain timeout. The specification places no requirement on the existence or the length of the timeout.
When either party wants to close the connection, it should do it gracefully by using the "Connection" header as described in "Client/Origin Server Connection" section.
Clients, servers and servers may close the connection at any time, so all these parts must be coded to be able to handle an asynchronous closure of the connection. For example, the client should be able to create a new connection and re-send the idempotent request.
Flow Control
The server should rely on the TCP's flow control mechanism to resolve temporary overloads, rather than terminating connections with the expectation that the client will retry. More details:
Pipelining Requests
A client may choose to pipeline request over a persistent connection: it may sent multiple requests without waiting for each response. The server must respond in the same order in which the requests were received.
Configuration
httpd
For details on how to configure HTTP persistent connections with httpd, see:
TO deplete
A HTTP persistent connection is a TCP/IP connection between the client and server that allows more that one request per connection.
It is the client that initially requests the connection to be kept alive. In HTTP 1.1, a persistent connection is initiated by specifying a "Keep-Alive" value for the "Connection" request header:
GET ... HTTP/1.1 Host: ... Connection: Keep-Alive
The server may or may not support persistent connections. If the server does support them, it will confirm that by including with the response a "Connection" response header:
200 OK Content-Length: ... Connection: Keep-Alive
Once both the client and the server have agreed on using persistent connections, they will keep the underlying TCP/IP connection open, and subsequent requests from that client will be sent over the persistent connection.