Provision Docker Storage on a Dedicated Block Device

Internal

• OpenShift 3.5 Installation

Procedure

Provision an unformatted block device. For this example, it will be referred to as /dev/sdb.

Create one partition that spans the entire device. Either fdisk or sfdisk can be used. This is how the partition is created with fdisk.

The procedure will create a /dev/sdb1 partition.

Erase all signatures from the partition:

wipefs -a /dev/sdb1

Initialize the partition for use by LVM by creating a physical volume:

pvcreate /dev/sdb1

Create the volume group, conventionally named "docker_vg", using the partition prepared by the previous steps /dev/sdb1:

vgcreate docker_vg /dev/sdb1

Crate the LVM thin pool:

lvcreate -y --type thin-pool --zero n -c 512K --poolmetadatasize 1041s -L 500M -n docker-pool docker_vg

Enable auto-extension (optional):

vchange --metadataprofile docker_vg--docker-pool-extend  docker_vg/docker-pool

Write /etc/sysconfig/docker-storage:

DOCKER_STORAGE_OPTIONS="--storage-driver devicemapper --storage-opt dm.fs=xfs --storage-opt dm.thinpooldev=/dev/mapper/docker_vg-docker--pool --storage-opt dm.use_deferred_removal=true"

Continue with /Users/ovidiu/projects/openshift/docker-storage-setup, function: setup_storage()

Verify your configuration. You should have a dm.thinpooldev value in the /etc/sysconfig/docker-storage file and a docker-pool logical volume:

# cat /etc/sysconfig/docker-storage
DOCKER_STORAGE_OPTIONS=--storage-opt dm.fs=xfs --storage-opt
dm.thinpooldev=/dev/mapper/docker--vg-docker--pool

# lvs
  LV          VG   Attr       LSize  Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  docker-pool rhel twi-a-t---  9.29g             0.00   0.12

Before using Docker or OpenShift Container Platform, verify that the docker-pool logical volume is large enough to meet your needs. The docker-pool volume should be 60% of the available volume group and will grow to fill the volume group via LVM monitoring.