WildFly HornetQ Cluster Connection Configuration: Difference between revisions

From NovaOrdis Knowledge Base
Jump to navigation Jump to search
Line 45: Line 45:


==<tt>connection-ttl</tt>==
==<tt>connection-ttl</tt>==
How long a cluster connection must stay alive (in milliseconds) if it stops receiving messages from a specific node in the cluster. The default value is 60,000 milliseconds.


==<tt>max-hops</tt>==
==<tt>max-hops</tt>==

Revision as of 04:48, 14 May 2016

Internal

Overview

A cluster connections represents an unidirectional communication channel between nodes. More details about the cluster connection concepts are available here: Cluster Connection Concepts. It is configured as follows:

<subsystem xmlns="urn:jboss:domain:messaging:1.4">
  <hornetq-server name="active-hq-node">
    ...
    <cluster-connections>
      <cluster-connection name="load-balancing-to-lb2-and-lb3">
        <address>jms</address>
        <connector-ref>netty-inbound</connector-ref>
        <retry-interval>500</retry-interval>
        <use-duplicate-detection>true</use-duplicate-detection>
        <forward-when-no-consumers>true</forward-when-no-consumers>
        <max-hops>1</max-hops>
        <static-connectors>
          <connector-ref>lb2</connector-ref>
          <connector-ref>lb3</connector-ref>
        </static-connectors>
      </cluster-connection>
    </cluster-connections>
   ...
   </hornetq-server>
</subsystem>

Configuration Elements

address

Each cluster connection only applies to messages sent to an address that starts with this value. The address can be any value and there can be many cluster connections with different address values, balancing messages for those addresses, potentially to different clusters of servers. This does not use wild card matching

connector-ref

The connector-ref is a required attribute that contains the connector value to be sent to the target of this cluster connection. This insures that the target node knows the connector information of the initiator node. It must be the name of a connector declared in the <connectors> configuration element of the initiator (this) HornetQ node.

check-period

The time period in milliseconds which is used to verify if a cluster connection has failed to receive pings from the target. The default value is 30,000 milliseconds.

connection-ttl

How long a cluster connection must stay alive (in milliseconds) if it stops receiving messages from a specific node in the cluster. The default value is 60,000 milliseconds.

max-hops

In symmetric clusters, max-hops must be set to 1.

static-connectors

One Target Connector Only


It has been determined experimentally that only the first connector listed under <static-connectors> is used, the others are ignored, so it seems that a cluster connection is a point-to-point affair.