KVM Virtualization Partition-Based Storage Pool Configuration

External

• RHEL 7 Virtualization Administration - Partition-based Storage Pools

Internal

• Linux Virtualization Configuration

Overview

This article explains how to expose a pre-formatted block device partition as storage pool, using virsh.

Do not use this procedure to configure an entire disk as storage pool. Follow this procedure for that Disk-based Storage Pool Configuration.

Procedure

Create a new partition to be exposed as the local storage pool. Use fdisk. For this example, the partition will be referred to as /dev/sda7.

Create a file system on the newly allocated partition, as described in mkfs.xfs or mkfs.ext4.