OpenShift 3.6 Virtualization Host Preparation

From NovaOrdis Knowledge Base
Revision as of 21:50, 7 November 2017 by Ovidiu (talk | contribs) (→‎Procedure)
Jump to navigation Jump to search

Internal

Overview

This procedure describes preparatory operations required by the installation of an OpenShift environment on a KVM virtualization host. None of these operations are OpenShift-specific, but they are necessary if OpenShift and support nodes are to be deployed in a KVM virtualization environment.

Procedure

1. Create a disk-based, partition-based, directory-based or LVM-based storage pool to maintain the ISO images used in the installation. The conventional name of the pool is "iso-images":

virsh # pool-info iso-images
Name:           iso-images
UUID:           e91bb163-c4be-4c1a-9212-70903e407a1c
State:          running
Persistent:     yes
Autostart:      yes
Capacity:       49.98 GiB
Allocation:     11.63 GiB
Available:      38.35 GiB