WildFly Clustering without Multicast

External

• How do I switch clustering to TCP instead of multicast UDP in EAP 6? https://access.redhat.com/solutions/140103
• Configuring Cluster to run with TCP in Domain Mode of EAP6 using CLI https://access.redhat.com/solutions/146323

Internal

• JGroups Subsystem Configuration
• JBoss Clustering without Multicast
• JGroups Protocol TCP

Procedure

Switch to a "tcp" Default Stack

Configuration File

Locate the "jgroups" subsystem in standalone.xml or domain.xml relevant profile, and set default-stack value to "tcp":

<subsystem xmlns="urn:jboss:domain:jgroups:1.1" default-stack="tcp">
...

WildFly 10.0 and higher:

...
<subsystem xmlns="urn:jboss:domain:jgroups:4.0">
   <channels ...>...</channels>
    <stacks default="tcp">
    ...

Domain CLI

/profile=ha/subsystem=jgroups:write-attribute(name=default-stack,value=tcp)

Note that the operation requires reload, but you should reload the server configuration only after the entire procedure is complete (see reload)

Standalone CLI

/subsystem=jgroups:write-attribute(name=default-stack,value=tcp)

Replace the MPING protocol with TCPPING

Configuration File

Locate the "tcp" stack inside the "jgroups" subsystem and replace the MPING protocol with TCPPING:

   ...
   <stack name="tcp">
      <transport type="TCP" socket-binding="jgroups-tcp"/>
      <protocol type="TCPPING">
          <property name="initial_hosts">1.2.3.4[7600],1.2.3.5[7600]</property>
          <property name="num_initial_members">2</property>
          <property name="port_range">0</property>
          <property name="timeout">2000</property>
       </protocol>
       <!--<protocol type="MPING" socket-binding="jgroups-mping"/>-->
       <protocol type="MERGE2"/>
       ...
   </stack>
  ...

If the domain model is used and the same profile is shared by several server groups, the "initial_hosts" property should be set on the server_group, as follows:

   ...
   <stack name="tcp">
      <transport type="TCP" socket-binding="jgroups-tcp"/>
      <protocol type="TCPPING">
          <property name="initial_hosts">${jboss.cluster.tcp.initial_hosts}</property>
          ...
       </protocol>
       ...
   </stack>
  ...

and the server group-specific values for the system property are set in the <server-group> element as follows:

    ...
    <server-groups>
        <server-group name="something" profile="ha">
            <socket-binding-group ref="ha-sockets"/>
            <system-properties>
              <property name="jboss.cluster.tcp.initial_hosts" value="1.2.3.4[7600],1.2.3.5[7600]" />
            </system-properties>
       </server-group>
      ...
    <server-groups>

CLI

Note that we can't simply remove MPING and add TCPING, the CLI API is not expressive enough to allow us to specify the protocol's position in the list. We need to replace MPING with TCPPING as follows:

/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/:write-attribute(name=type,value=TCPPING)

then remove the "socket-binding" node:

/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/:write-attribute(name=socket-binding)

/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=initial_hosts:add(value="1.2.3.4[7600],1.2.3.5[7600]")
/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=num_initial_members:add(value="2")
/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=port_range:add(value="0")
/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=timeout:add(value="2000")

In domain mode, if the same profile is shared by several server groups, the "initial_hosts" property should be set on the server_group and not in the profile, as follows:

/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=initial_hosts:add(value="${jboss.cluster.tcp.initial_hosts}")

In this case, the server group-specific values for the system property are set in the <server-group> element as described in manipulating per-server-group properties (note that the value must be set before :reload otherwise the reload will fail:

/server-group=web/system-property=jboss.cluster.tcp.initial_hosts:add(value="1.2.3.4[7600],1.2.3.5[7600]")

Reload

The controllers must be reloaded, first the domain controller and then the host controllers. It is important to reload the domain controller first, otherwise MPING to TCPPING replacement does not propagate to the subordinate host controllers:

reload --host=dc1
reload --host=h1 --restart-servers=true
reload --host=h2 --restart-servers=true

For more details see reload.

Additional Verifications

• Verify that the cluster members do actually bind to the IP addresses specified in initial_hosts.
• See port_range recommendations.
• See num_initial_members recommendations.

Why Doesn't the Cluster Form?

Even if the cluster if correctly configured, the JGroups channels won't be initialized and won't form clusters at boot. This is because the JGroups groups only form if there are services requiring clustering.

One way to start clustering is to deploy a <distributable> servlet.

Another way is to declare cache containers as "eager" starters. For more details see WildFly Infinispan Subsystem Configuration#Caches_Do_Not_Start_at_Boot_Even_if_Declared_Eager.

Other Subsystems that May Require Switching to TCP

WildFly HornetQ-Based Messaging Subsystem - Clustering with TCP