Linux 7 Configuring a Network Interface

From NovaOrdis Knowledge Base
Revision as of 03:06, 4 April 2017 by Ovidiu (talk | contribs) (→‎UUID)
Jump to navigation Jump to search

External

Internal

Overview

The configuration files corresponding to the network interfaces are located in /etc/sysconfig/network-scripts.

ifcfg-eth0 example: 

DEVICE="eth0"
NAME="eth0"
TYPE="Ethernet"
ONBOOT="yes"
IPADDR="192.168.1.9"
NETMASK="255.255.255.0"
PREFIX="24"
GATEWAY="192.168.1.1"
DNS1="192.168.1.1"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
IPV6_PRIVACY="no"

Configuration

IPADDR

NETMASK

PREFIX

UUID

HWADDR

Change the IP Address

IPADDR="172.20.1.3"
NETMASK="255.255.0.0"
PREFIX="16"

Configure a Network Interface after Cloning a VM Image

You want to generated a different Mac address when cloning an image, to avoid collisions.

If "HWADDR" is set pointing to the old hardware address, we want to remove it from the cloned configuration file, because if it stays there, and the hardware address is not available, the interface won't start.

Retrieved from "https://kb.novaordis.com/index.php?title=Linux_7_Configuring_a_Network_Interface&oldid=19366"