JGroups Protocol VERIFY SUSPECT
External
- VERIFY_SUSPECT manual page http://www.jgroups.org/manual/index.html#_verify_suspect
- JGroups Wiki http://community.jboss.org/wiki/JGroupsVERIFYSUSPECT
Internal
Overview
VERIFY_SUSPECT is a protocol that checks a suspected member.
Suspect Verification
VERIFY_SUSPECT verifies that a suspected member is really dead by pinging that member once again. If the member responds, it drops the SUSPECT message. Tries to minimize false suspicions.
The protocol works as follows: it catches SUSPECT events traveling up the stack:
[2016-02-29 09:25:22,487] [TRACE] [org.jgroups.protocols.VERIFY_SUSPECT] (Cluster Dispatch) -- verifying that host02/tcp is dead
Verifies that the suspected member is really dead. If yes, passes SUSPECT event up the stack, otherwise discards it.
VERIFY_SUSPECT must be placed somewhere above the failure detection layer and below the GMS layer (receiver of the SUSPECT event). Note that SUSPECT events may be reordered by this protocol.
Periodic Scans
VERIFY_SUSPECT starts an internal thread ("VERIFY_SUSPECT.TimerThread") when a suspect is added to the suspect table. The thread continually iterates over the entries and removes entries whose time have elapsed. For each removed entry, a SUSPECT event is passed up the stack (because elapsed time means verification of member's liveness failed). Computes the shortest time to wait (min of all timeouts) and waits(time) ms. Will be woken up when entry is removed (in case of successful verification of that member's liveness). Terminates when no entry remains in the table.
Configuration
<VERIFY_SUSPECT timeout="1500"/>