Docker Networking Concepts: Difference between revisions

From NovaOrdis Knowledge Base
Jump to navigation Jump to search
 
Line 162: Line 162:
==Virtual Network Adapter==
==Virtual Network Adapter==


A container connects to one or more available networks via one or more virtual network adapters.
A container connects to one or more available [[Docker_Networking_Concepts#Network_Drivers|networks]] via one or more virtual network adapters.


==Outbound Traffic==
==Outbound Traffic==

Latest revision as of 19:27, 2 May 2018

External

Internal

Overview

Docker's networking subsystem uses drivers. Docker comes with several drivers, and others can be developed and deployed. The drivers available by default are described below:

Network Drivers

docker info lists the network drivers available to a certain Docker server:

...
Plugins:
 ...
 Network: bridge host macvlan null overlay

Networks backed by different drivers may coexists within the same Docker server. By default, a Docker servers starts with three networks based on three different drivers: the "default" bridge network, a host network and a "null" network:

docker network ls

NETWORK ID          NAME                DRIVER              SCOPE
638f161bfddd        bridge              bridge              local
036bdd552d37        host                host                local
6f70805abd20        none                null                local

By default, all containers will connect to the default "bridge" network. This default mode can be changed, for example --net configures the server to allow containers to use the host's own network device and address.

Detailed information about a specific network, including the subnet address, the gateway address, and the containers attached to it, can be obtained with:

docker network inspect <network-name>

bridge

https://docs.docker.com/network/bridge/
https://docs.docker.com/network/network-tutorial-standalone/

A bridge network consists of a software bridge that allows containers connected to it to communicate, while providing isolation from containers not connected to it. It can be thought as a virtual switch into which containers plug in to communicate among themselves and with the outside world. A Docker server starts by default a default bridge, named "bridge", and all containers, unless configured otherwise, connect by default to it. This configuration is appropriate when multiple containers need to communicate on the same Docker host. The Docker bridge driver automatically installs rules on the host machine so that containers on different bridge networks cannot communicate directly with each other.

The Default Bridge Network

By default, and without additional configuration, a default bridge network is created, and all containers executed by the Docker server will connect to it.

DockerNetworkingDefaultBridge.png
docker network ls

[...]
NETWORK ID          NAME                DRIVER              SCOPE
158b89572a60        bridge              bridge              local

The default bridge network is considered a legacy detail of Docker and it is not recommended for production use. User-defined bridge networks are recommended instead. Details about the default bridge network can be obtained with

docker network inspect bridge 

The default bridge gateway address coincides with the IP address configured on the Docker host's TCP/IP stack "docker0" interface. The default bridge network can be configured in daemon.json. All containers connected to it use the same configuration (such as MTU and iptables rules). Outgoing traffic originating from containers connected to the default bridge network is routed externally by default. To accept incoming traffic, special port publishing configuration needs to be applied.

IP Forwarding

By default, traffic from containers connected to the default bridge is forwarded to the outside world. Forwarding can be enabled or disabled as described here.

User-Defined Bridge Networks

User-defined bridge networks can also be created.


Docker documentation recommends this as the best configuration to use with standalone containers.

Each user-defined bridge network creates a separate bridge, which can be configured independently. When a user-defined bridge is created or removed, or containers are connected or disconnected from the bridge, Docker uses OS-specific tools to manage the underlying network infrastructure, such as adding or removing bridge devices and configuring iptables rules.

User-defined bridge networks have some advantages over the default bridge network:

  • All containers connecting to a user-define bridge network open all ports to each other. This is not the case with the default bridge network, for two containers on the default bridge network to communicate, they need to expose their ports with -p.
  • User-defined bridges provide automatic DNS resolution between containers, and resolves the names of the containers to their IP address. Containers on the default bridge network can only access each other by IP, unless --link is used, which is deprecated and it will be removed. Also, linked containers with --link share environment variables. For more details see https://docs.docker.com/network/links/.
  • In case of user-defined bridges, containers can be connected and disconnected from the network bridge dynamically. In case of the default bridge, a container can be disconnected only if it stopped and recreated with different network options.

Details about a specific user-define bridge network can be obtained with docker network inspect <network-name>. Its gateway address coincides with the IP address of a Docker host's TCP/IP stack "br-...." interface.

DockerNetworkingUserDefinedBridge.png

Configuration

User-defined bridge networks can be configured with:

subnet

Subnet in CIDR format that represents a network segment.

ip-range

Allocate container ip from a sub-range.

gateway

IPv4 or IPv6 Gateway for the master subnet.

Connecting Containers to a User-Defined Bridge Network

Connect a Container to a Network

host

https://docs.docker.com/network/host/
https://docs.docker.com/network/network-tutorial-host/

This network driver removes network isolation between the container and the Docker host, and it uses the host's networking directly. This use case is appropriate when the container's network stack should not be isolated from the Docker host, but other aspects of the containers should be isolated. A host network named "host" is available by default on the Docker server:

docker network ls

NETWORK ID          NAME                DRIVER              SCOPE
...
036bdd552d37        host                host                local

If a container is executed with "--network host", then the container will bind directly to the host network interface. No new Docker host-level interface will be created.

overlay

https://docs.docker.com/network/overlay/
https://docs.docker.com/network/network-tutorial-overlay/

Overlay networks connect multiple Docker daemons together.

macvlan

https://docs.docker.com/network/macvlan/
https://docs.docker.com/network/network-tutorial-macvlan/

The macvlan driver allows assigning a MAC address to a container, making it appear as a physical device on the network. The Docker daemon routes traffic to containers by their MAC addresses.

none

https://docs.docker.com/network/none/

Container networking can be disabled altogether.

iptables

https://docs.docker.com/network/iptables/

Container Networking

https://docs.docker.com/config/containers/container-networking/

A Docker container behaves like a host on a private network. Each container has its own virtual network stack, Ethernet interface and its own IP address, a gateway, routing table, DNS services, etc.

The network the container will be connected to is defined when the container is created: Connect a Container to a Network.

The type of network a container uses (bridge, host or other, except none) is transparent from the container. By default, the container is assigned an IP address for every Docker network it connects to. The IP address is assigned from the pool assigned to the network, so the Docker daemon effectively acts as a DHCP server for each container. However, a specific IP address can be "forced" with the --ip flag when the container is started. Each network also has a default subnet mask and gateway.

The container's hostname defaults to the container name, but can be changed with --hostname.

When the container starts, it can only be connected to a single network, using --network. However, you can connect a running container to multiple networks, as shown in Connecting a Container to More Than One Bridge.

By default, a container inherits the NDS settings of the Docker Dameon, including /etc/hosts and /etc/resolv.conf. These settings can be overridden on a per-container basis with --dns (which specifies the address of the DNS server), --dns-search, --dns-opt. For more details see https://docs.docker.com/config/containers/container-networking/#dns-services.

Virtual Network Adapter

A container connects to one or more available networks via one or more virtual network adapters.

Outbound Traffic

The IP traffic generated by the container goes over its network interface and into whatever networking driver the Docker server uses. It could be the default bridge, a user-defined bridge, a host network or other. Depending on the network type, the traffic usually reaches the containers on the same Docker host network.

Inbound Traffic

When a container is created, it does not exposes any of its port to the outside world. Ports can be explicitly exposed with -p, --publish. This creates a firewall rule which maps a Docker host port to a container port, which is equivalent with the container "binding" to Docker host ports. The inbound traffic passes over a proxy that is part of the Docker server before getting to containers..

Also see:

Network Namespace

Configure the Container to Use a Proxy Server

https://docs.docker.com/network/proxy/

Connecting a Container to More Than One Bridge

A container can be connected to more than one bridge. This can be achieved by running the container with a --network specification, and then executing

docker network connect <other-network> <container-name>

Details about the Network the Container is Connected To

docker network inspect <network-name>

returns detailed information about a specific network, the output contains the containers attached to it.