Linux Logical Volume Management Operations

External

• https://www.howtogeek.com/howto/40702/how-to-manage-and-use-lvm-logical-volume-management-in-ubuntu/

Internal

• Logical Volume Management

Overview

Logical volume management commands can be issued from the lvm console, or as standalone commands. For example:

lvm> lvs

produces identical results to

lvs

Inventory of Devices that May Be Used as Physical Volumes

lvmdiskscan

Example:

[root@rhel-test ~]# lvmdiskscan
  /dev/rhel_rhel-test/swap [     820.00 MiB] 
  /dev/sda1                [     500.00 MiB] 
  /dev/rhel_rhel-test/root [       6.67 GiB] 
  /dev/sda2                [       7.51 GiB] LVM physical volume
  /dev/sdb                 [       2.00 GiB] 
  3 disks
  1 partition
  0 LVM physical volume whole disks
  1 LVM physical volume

The output specifies which device is already a LVM Physical Volume

To see only the existing Physical Volumes (devices that have Volume Groups on them)

lvmdiskscan -l

Physical Volume Operations

Information about Physical Volumes

Inventory of Physical Volumes

pvs

Example:

[root@rhel-test ~]# pvs
  PV         VG             Fmt  Attr PSize PFree
  /dev/sda2  rhel_rhel-test lvm2 a--  7.51g    0 

Equivalent command with slightly different output:

pvscan

Example:

[root@rhel-test ~]# pvscan
  PV /dev/sda2   VG rhel_rhel-test   lvm2 [7.51 GiB / 0    free]
  Total: 1 [7.51 GiB] / in use: 1 [7.51 GiB] / in no VG: 0 [0   ]

Details about a Specific Physical Volume

pvdisplay [PhysicalVolumePath [PhysicalVolumePath...]]

Example:

[root@rhel-test ~]# pvdisplay /dev/sda2
  --- Physical volume ---
  PV Name               /dev/sda2
  VG Name               rhel_rhel-test
  PV Size               7.51 GiB / not usable 3.00 MiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              1922
  Free PE               0
  Allocated PE          1922
  PV UUID               xV16At-8wPi-wFp0-42BL-XFX0-5aJE-F471OI

Physical Volume Management Operations

• Initialize physical volume(s) for use by LVM

• Change attributes of physical volume

pvchange

• Resize physical volume

pvresize

• Check the consistency of physical volume

pvck

• Move extents from one physical volume to another

pvmove

• Remove LVM label(s) from physical volume(s)

pvremove

Volume Group Operations

Information about Volume Groups

vgs

vgdisplay --verbose 

Volume Group Management Operations

• Create a Volume Group
• Add Physical Volumes to a Volume Group

Logical Volume Operations

Information about Logical Volumes

• lvs - command that provides information about logical volumes available on the system.
• lvdisplay
• lvscan - scan all known volume groups or all supported LVM block devices in the system for defined Logical Volumes.

lvdisplay --verbose 

lvscan scan all known volume groups or all supported LVM block devices in the system for defined Logical Volumes.

lvscan

Logical Volume Management Operations

Creating a Logical Volume

lvm
lvm> lvcreate --size 20G --name santorini VolGroup00

Extending a Logical Volume

http://www.azhowto.com/2009/02/06/how-to-resize-lvm-running-xen-explained-part-1-increase-disk-size

Renaming a Logical Volume

lvm 
lvm> lvrename VolGroup00 LogVol05numbercat lv05

Remove a Logical Volume

Gather statistics on the free space before removing, and also on the size of the logical volume to be removed:

vgs

lvs   

Unmount the volume if necessary (or shutdown the service that is using it, as it is the case with Docker):

umount /dev/VolGroup00/MyLV1

Remove the logical volume with lvremove.

The command has a "dry run mode" (-t):

lvremove /dev/<VG_name>/<LV_name>

lvremove -t /dev/<VG_name>/<LV_name>

Example:

[root@rhel-test lvm]# lvremove -t /dev/rhel_rhel-test/docker-pool 
  TEST MODE: Metadata will NOT be updated and volumes will not be (de)activated.
Do you really want to remove active logical volume docker-pool? [y/n]: y
  Logical volume "docker-pool" successfully removed

This command actually removes it:

lvremove [-v] /dev/VolGroup00/MyLV1

Shrinking the Filesystem and the Logical Volume

This is the simple case, it will only work if the logical volume *does not* contain a partition table:

fsadm

or

umount lvm_partition
resize2fs /dev/vg/lv newSize
lvresize -L disksize /dev/vg/lv
resize2fs /dev/vg/lv

Shrinking a Logical Volume used by a xen Virtual Machine

Logical Volume Management and Virtualization