Linux NFS Installation

Internal

• Linux NFS

Relevance

• Updated for Amazon EC2

Server Installation

Install Packages

sudo su -
yum install rpcbind nfs-utils 

On some system we also need to install "nfs-utils-lib".

Setup Security

iptables

Normally, a specific list of ports should be provided to iptables. I tried the following, but it did not work:

...
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0 -m state --state NEW -p udp --dport 111 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0 -m state --state NEW -p tcp --dport 111 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0 -m state --state NEW -p tcp --dport 2049 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0  -m state --state NEW -p tcp --dport 32803 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0  -m state --state NEW -p udp --dport 32769 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0  -m state --state NEW -p tcp --dport 892 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0  -m state --state NEW -p udp --dport 892 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0  -m state --state NEW -p tcp --dport 875 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0  -m state --state NEW -p udp --dport 875 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0  -m state --state NEW -p tcp --dport 662 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0 -m state --state NEW -p udp --dport 662 -j ACCEPT
-A SSH -s 192.168.0.0/255.255.0.0 -j ACCEPT
...

then

service iptables restart

I ended up allowing everything from 192.168.0.0/255.255.0.0 for the duration of using the NFS.

...
-A RH-Firewall-1-INPUT -s 192.168.0.0/255.255.0.0 -j ACCEPT
...

Amazon EC2

Amazon EC2 NFS Server Security Group

Define the Directories to Share

1. Create the directory:

mkdir /opt/shared

2. Give it the right permissions that make sense across your entire client set.

3. Share it /etc/exports.

Best if you specify only the subnet that must have access to it:

...
/opt/shared 192.168.0.0/255.255.255.0(rw,sync,no_root_squash,no_subtree_check)
...

More details on export options can be found here:

|[NFS#ExportOptions]

!!Start NFS

!Linux

{{{ service rpcbind start service nfs start }}}

!Amazon

{{{ service nfs-server start }}}

!!Start at Boot

!init.d

Also add these to Template:Chkconfig if needed on reboot.:

{{{ chkconfig --add rpcbind chkconfig --add nfs chkconfig --level 2345 rpcbind on chkconfig --level 2345 nfs on }}}

More details on chkconfig:

|[chkconfig]

!systemd

grep nfs-server

More details on

|[systemd]