WildFly Clustering without Multicast

From NovaOrdis Knowledge Base
Revision as of 08:17, 24 February 2016 by Ovidiu (talk | contribs) (→‎Reload)
Jump to navigation Jump to search

External

Internal

Procedure

Switch to a "tcp" Default Stack

Configuration File

Locate the "jgroups" subsystem in standalone.xml or domain.xml relevant profile, and set default-stack value to "tcp":

  ...
  <subsystem xmlns="urn:jboss:domain:jgroups:1.1" default-stack="tcp">
  ...

CLI

/profile=ha/subsystem=jgroups:write-attribute(name=default-stack,value=tcp)

Note that the operation requires reload, but you should reload the server configuration only after the entire procedure is complete (see reload)

Replace the MPING protocol with TCPPING

Configuration File

Locate the "tcp" stack inside the "jgroups" subsystem and replace the MPING protocol with TCPPING:

   ...
   <stack name="tcp">
      <transport type="TCP" socket-binding="jgroups-tcp"/>
      <protocol type="TCPPING">
          <property name="initial_hosts">1.2.3.4[7600],1.2.3.5[7600]</property>
          <property name="num_initial_members">2</property>
          <property name="port_range">0</property>
          <property name="timeout">2000</property>
       </protocol>
       <!--<protocol type="MPING" socket-binding="jgroups-mping"/>-->
       <protocol type="MERGE2"/>
       ...
   </stack>
  ...

If the domain model is used and the same profile is shared by several server groups, the "initial_hosts" property should be set on the server_group, as follows:

   ...
   <stack name="tcp">
      <transport type="TCP" socket-binding="jgroups-tcp"/>
      <protocol type="TCPPING">
          <property name="initial_hosts">${jboss.cluster.tcp.initial_hosts}</property>
          ...
       </protocol>
       ...
   </stack>
  ...

and the server group-specific values for the system property are set in the <server-group> element as follows:

    ...
    <server-groups>
        <server-group name="something" profile="ha">
            <socket-binding-group ref="ha-sockets"/>
            <system-properties>
              <property name="jboss.cluster.tcp.initial_hosts" value="1.2.3.4[7600],1.2.3.5[7600]" />
            </system-properties>
       </server-group>
      ...
    <server-groups>

CLI

Note that we can't simply remove MPING and add TCPING, the CLI API is not expressive enough to allow us to specify the protocol's position in the list. We need to replace MPING with TCPPING as follows:

/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/:write-attribute(name=type,value=TCPPING)

then remove the "socket-binding" node:

/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/:write-attribute(name=socket-binding)
/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=initial_hosts:add(value="1.2.3.4[7600],1.2.3.5[7600]")
/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=num_initial_members:add(value="2")
/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=port_range:add(value="0")
/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=timeout:add(value="2000")
In domain mode, if the same profile is shared by several server groups, the "initial_hosts" property should be set on the server_group and not in the profile, as follows:
/profile=ha/subsystem=jgroups/stack=tcp/protocol=MPING/property=initial_hosts:add(value="${jboss.cluster.tcp.initial_hosts}")

In this case, the server group-specific values for the system property are set in the <server-group> element as described in manipulating per-server-group properties (note that the value must be set before :reload otherwise the reload will fail:

/server-group=web/system-property=jboss.cluster.tcp.initial_hosts:add(value="1.2.3.4[7600],1.2.3.5[7600]")

Reload

The controllers must be reloaded, first the domain controller and then the host controllers. It is important to reload the domain controller first, otherwise replacing MPING with TCPPING does not take:

reload --host=dc1
reload --host=h1 --restart-servers=true
reload --host=h2 --restart-servers=true

For more details see reload.

Additional Verifications

  • Verify that the cluster members do actually bind to the IP addresses specified in initial_hosts.
  • See port_range recommendations.
  • See num_initial_members recommendations.

Other Subsystems that May Require Switching to TCP

WildFly Messaging Subsystem Clustering with TCP