OpenShift 3.5 Installation: Difference between revisions

From NovaOrdis Knowledge Base
Jump to navigation Jump to search
Line 487: Line 487:


In order for the logging pods to spread evenly across the cluster, an empty [[OpenShift Concepts#Node_Selector|node selector]] should be used. The "logging" project should have been created already. The empty [[OpenShift_Concepts#Per-Project_Node_Selector|per-project node selector]] can be updates as follows:
In order for the logging pods to spread evenly across the cluster, an empty [[OpenShift Concepts#Node_Selector|node selector]] should be used. The "logging" project should have been created already. The empty [[OpenShift_Concepts#Per-Project_Node_Selector|per-project node selector]] can be updates as follows:
oc edit namespace logging
...
metadata:
  annotations:
    <b>openshift.io/node-selector: ""</b>
...


==Deploy a HAProxy Router==
==Deploy a HAProxy Router==

Revision as of 19:23, 30 July 2017

External

Internal

Overview

There are two installation methods: quick install, which uses a CLI tool available in the "atomic-openshift-utils" package, which, in turn, uses Ansible in the background, and advanced install. The advanced install assumes familiarity with Ansible. This document covers advanced install.

Prerequisites

External DNS Setup

An external DNS server is required. If you control a registrar DNS zone, such as http://godaddy.com, that will work. A valid alternative is to install a dedicated DNS server. The DNS server must be available to all OpenShift environment nodes, and also to external clients than need to resolve public names such as the master public web console and API URL, the application router public DNS name, etc. A combination of a public DNS server that resolve public addresses and an internal DNS server that resolve internal addresses is also valid: if you have different means of resolving public names to clients, a DNS server deployed as part of the environment will work. It can be deployed on the support node. This installation procedure includes installation of the bind DNS server on the support node - see "bind DNS server installation" section below.

Wildcard Domain for Application Traffic

The DNS server that resolves the public addresses will need to be capable to support wildcard sub-domains and resolve the public wildcard DNS entry to the public IP address of the node that executes the default router. If the environment has multiple routers, an external load balancer is required, and the wildcard record must contain the public IP address of the host that runs the load balancer. The name of the wildcard domain will be later specified during the advanced installation procedure in the Ansible inventory file as 'openshift_master_default_subdomain'.

For the configuration procedure see:

Declare a Wildcard Subdomain for bind
Setting Up a Wildcard DNS at godaddy.com

Minimum Hardware Requirements

https://docs.openshift.com/container-platform/3.5/install_config/install/prerequisites.html#hardware

A full RHEL7.3 master installation requires 121 MB in /boot and an average of 2.4 GB in /. A full RHEL7.3 node installation requires 121 MB in /boot and an average of 2.2 GB in /.

O/S Requirements and Configuration

https://docs.openshift.com/container-platform/3.5/install_config/install/prerequisites.html
https://docs.openshift.com/container-platform/3.5/install_config/install/host_preparation.html

Common Template Preparation


Use the same template for the support node and OpenShift nodes.

Provision the Virtual Machine

The procedure to build VirtualBox VMs is described here. The procedure to build VMware VMs is described here. The procedure to build a KVM guest is described here.

Perform a "minimal" RHEL installation

Install RHEL 7.3 in "minimal" installation mode. This document describes the installation in top of a a VirtualBox or VMware Fusion virtual machine:

RHEL 7 Installation

NetworkManager

OpenShift requires NetworkManager on all nodes (see https://docs.openshift.com/container-platform/3.5/install_config/install/prerequisites.html#prereq-networkmanager). Make sure it works:

nmcli g

Configure a Static IP Address

Assign a static IP address to the interface to be used by the OpenShift cluster, as described here: adding a Static Ethernet Connection with NetworkManager. Editing /etc/sysconfig/network-scripts/ifcfg* also works: Linux 7 Configuring a Network Interface.

The static IP address will be changed when the template is cloned into actual virtual machine instances.

Set Up DNS Resolver

Configure NetworkManager to relinquish management of /etc/resolv.conf: Network Manager and DNS Server.

Stop NetworkManager (otherwise it'll overwrite the file we're modifying):

 systemctl stop NetworkManager

Then, configure the DNS resolver to the environment DNS serve in /etc/resolv.conf:

search openshift35.local
domain openshift35.local
nameserver <internal-ip-address-of-the-support-node-that-will-run-named>
nameserver 8.8.8.8

Note that the internal support node address should be temporarily commented out until the DNS server is fully configured and started on that node, otherwise all network operations will be extremely slow.

Also, turn off sshd client name DNS verification.

Subscription

Attach the node to the subscription, using subscription manager, as described here: registering a RHEL System with subscription manager. The support node(s) need only a Red Hat Enterprise Linux. The OpenShift nodes need an OpenShift subscription. For OpenShift, follow these steps: https://docs.openshift.com/container-platform/3.5/install_config/install/host_preparation.html#host-registration.

The the summary of the sequence of steps is available below - the goal of these steps is to configure the following supported repositories on the system: "rhel-7-server-rpms", "rhel-7-server-extras-rpms", "rhel-7-server-ose-3.5-rpms", "rhel-7-fast-datapath-rpms":

subscription-manager register
subscription-manager list --available --matches '*OpenShift*'
subscription-manager attach --pool=<pool-id> --quantity=1
subscription-manager repos --disable="*"
subscription-manager repos --list-enabled
yum repolist
yum-config-manager --disable <repo_id>
subscription-manager repos --enable="rhel-7-server-rpms" --enable="rhel-7-server-extras-rpms" --enable="rhel-7-server-ose-3.5-rpms" --enable="rhel-7-fast-datapath-rpms"
subscription-manager repos --list-enabled
yum repolist
yum install wget git net-tools bind-utils iptables-services bridge-utils bash-completion kexec sos psacct zip unzip
yum update -y
yum install atomic-openshift-utils

Excluders

Prevent accidental upgrades of OpenShiift and Docker, by installing "excluder" packages. The *-excluder packages add entries to the "exclude" directive in the host’s /etc/yum.conf file when installed. Those entries can be removed later when we explicitly want to upgrade OpenShift or Docker. More details in yum Exclusion.

yum install atomic-openshift-excluder atomic-openshift-docker-excluder

If later we need to upgrade, we must run the following command:

atomic-openshift-excluder unexclude

At this point, no OpenShift binaries, except utilities, are installed. The advanced installer knows how to override this and it will install the binaries as expected, without any further intervention.

Reboot

Reboot the system to make sure it starts correctly after package installation:

systemctl reboot

Configure the Installation User

Create an installation user that can log in remotely from support.openshift35.local, which is the host that will drive the Ansible installation. Conventionally we name that user "ansible" and it must be able to passwordlessly ssh into itself and all other environment nodes, and also passwordless sudo. The user will be part of the template image.

 groupadd -g 2200 ansible
 useradd -m -g ansible -u 2200 ansible

Install the Public Installation Key

OpenShift installer requires passwordless public key-authenticated access.

Generate a public/private key pair as described here and install the public key into template's "ansible" .ssh/authorized_keys. The private key should be set aside and later installed onto the ansible installation host.

Also, allow passwordless sudo for the 'ansible' user.

Firewall Configuration

Turn off firewalld and configure the iptables service.

systemctl stop firewalld
systemctl disable firewalld
systemctl is-enabled firewalld
yum remove firewalld

OpenShift needs iptables running:

systemctl enable iptables
systemctl start iptables

NFS Client

Install NFS client dependencies.

SELinux

Make sure SELinux is enabled on all hosts. If is not, enable SELinux and make sure SELINUXTYPE is "targeted" in /etc/selinux/config.

 sestatus

Docker Installation

https://docs.openshift.com/container-platform/3.5/install_config/install/host_preparation.html#installing-docker

Install Docker on the template. On a small number of guests, such as the proxies and the support host, it will simply not be activated. Docker is also technically not required on masters, it seems the installation will break if not available (more to comment here later). The binaries must be installed from the rhel-7-server-ose-3.*-rpms repository and have it running before installing OpenShift.

OpenShift 3.5 requires Docker 1.12.

yum install docker
docker version

The advanced installation procedure is supposed to update /etc/sysconfig/docker on nodes with OpenShift-specific configuration. The documentation says that the advanced installation procedure will add an "--insecure-registry" option, but that does not seem to be the case, so we add it manually in /etc/sysconfig/docker:

INSECURE_REGISTRY='--insecure-registry 172.30.0.0/16'

The subnet value used to configure the insecure registry corresponds to the default value of the services subnet.

Provision storage for the Docker server. The default loopback storage is not appropriate for production, it should be replaced by a thin-pool logical volume. Follow https://docs.openshift.com/container-platform/3.5/install_config/install/host_preparation.html#configuring-docker-storage. Used Option A) "an additional block device". On VirtualBox or KVM, provision a new virtual disk and install it. At this stage, the size it is not important, as it will replaced with the actual storage when the nodes are built. Use 100 MB for the template.

KVM example (the template VM must be shut down prior to attaching the storage):

 virsh vol-create-as --pool main-storage-pool --name template-docker.raw --capacity 1024M
 virsh vol-list --pool main-storage-pool
 virsh attach-disk template /main-storage-pool/template-docker.raw vdb --config

Restart the template VM, the new storage should be available as /dev/vdb.

Then execute /usr/bin/docker-storage-setup with the base configuration read from /usr/lib/docker-storage-setup/docker-storage-setup and custom configuration specified in /etc/sysconfig/docker-storage-setup, similarly to:

STORAGE_DRIVER=devicemapper
DEVS=/dev/vdb
VG=docker_vg
# set to a little bit less than maximum amount of space available
DATA_SIZE=1023M
MIN_DATA_SIZE=1M

Setting DATA_SIZE too small caused nodes not being able to start and OpenShift OutOfDisk events.

Execute:

 /usr/bin/docker-storage-setup

Under some circumstances, /usr/bin/docker-storage-setup fails with:

[...]
end of partition 1 has impossible value for cylinders: 65 (should be in 0-64)
sfdisk: I don't like these partitions - nothing changed.
(If you really want this, use the --force option.)

If this happens, use the patched docker-storage-setup available here: https://github.com/NovaOrdis/playground/blob/master/openshift/3.5/patches/node/usr/bin/docker-storage-setup

Before running it, remove any logical volume, volume group and physical volume that may have been created and leave an empty /dev/vdb1 partition. Then run

 /usr/bin/docker-storage-setup --force

After the script completes successfully, it creates a logical volume with an XFS filesystem mounted on docker root directory /var/lib/docker and the Docker storage configuration file /etc/sysconfig/docker-storage. The thin pool to be used by Docker should be visible in lvs:

# lvs

  LV          VG        Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  docker-pool docker_vg twi-a-t--- 500.00m             0.00   0.88
  root        main_vg   -wi-ao----   7.00g

Alternatively, you can follow the manual procedure of provisioning Docker storage on a dedicated block device:

Provision Docker Storage on a Dedicated Block Device

Disable docker-storage-setup, is not needed, storage already setup.

 systemctl disable docker-storage-setup
 systemctl is-enabled docker-storage-setup

Enable Docker at boot and start it.

 systemctl enable docker
 systemctl start docker
 
 systemctl status docker

Reboot the system and then check Docker Server Runtime.

TODO: parse and NOKB this: https://docs.openshift.com/container-platform/3.5/scaling_performance/optimizing_storage.html#optimizing-storage

Generic Docker installation instructions Docker Installation.

Miscellaneous

Cloud-Provider Specific Configuration

Access/Proxy Host Configuration

Clone the Template

Clone the template following the procedure described here Cloning a KVM Guest. While cloning, consider the following:

Post-Cloning

  • Turn off external root access.
  • Add external users.
  • Disable and remove Docker.

There is no need to install HAProxy manually to serve as master node load balancer, the OpenShift installation procedure will do it.

  • Add the IP addresses for masters, support and lb (itself) to /etc/hosts, the DNS server may not be operational when we need it.
192.168.122.10 in in.local lb lb.local
192.168.122.12 support support.local
192.168.122.13 master1 master1.local
192.168.122.14 master2 master2.local
192.168.122.16 master3 master3.local

Support Host Configuration

Clone the Template

Clone the template following the procedure described here Cloning a KVM Guest. While cloning, consider the following:

  • Adjust the memory and the number of virtual CPUs.
  • The support host needs an additional block storage device, but it won't be used for Docker storage and it will be different in size.

Post-Cloning

  • Turn off docker and disable it
  • Remove the docker logical volume
  • Replace the docker storage with nfs storage - it should still be /dev/vdb1

NFS Server Installation

Install and configure an NFS server. The NFS server will serve storage for persistent volumes, metrics and logging. Build a dedicated storage device to be shared via NFS, but do not export individual volumes; the OpenShift installer will do that automatically. At this stage, make sure the storage is mounted, NFS server binaries are installed, and iptables is correctly configured to allow NFS to serve storage. A summary of these steps is presented in Provisioning and Installing a New Filesystem on a New Logical Volume and NFS Server Installation. All steps of the procedure must be executed, less the export part.

bind DNS Server Installation


During the next iteration, consider installing the DNS server on "in", as "in" is always on, and the load balancer also runs on "in" and it needs internal name resolution. Also make haproxy dependent on named.

bind DNS Server Installation

OpenShift Node Configuration

Clone the template following the procedure described here Cloning a KVM Guest. While cloning, consider the following:

Adjust the memory and the number of virtual CPUs.

Configure the DNS client to use the DNS server that was installed as part of the procedure. See "manual /etc/resolv.conf Configuration" and https://docs.openshift.com/container-platform/3.5/install_config/install/prerequisites.html#prereq-dns

Configure docker disk (note that the sequence described blow needs a modified /usr/bin/docker-storage-setup):

systemctl stop docker
unalias rm
rm -r /var/lib/docker
cat /dev/null > /etc/sysconfig/docker-storage
pvs
fdisk /dev/vdb
/usr/bin/docker-storage-setup --force
systemctl is-enabled docker
systemctl start docker
systemctl status docker

OpenShift Advanced Installation

https://docs.openshift.com/container-platform/latest/install_config/install/advanced_install.html#install-config-install-advanced-install
https://github.com/openshift/openshift-ansible/blob/master/inventory/byo/hosts.ose.example

The Support Node

Execute the installation as "ansible" from the support node.

As "root" on "support":

cd /usr/share/ansible
chgrp -R ansible /usr/share/ansible
chmod -R g+w /usr/share/ansible

The support node needs at least 1 GB or RAM to run the installation process.

Configure Ansible Inventory File

The default Ansible inventory file is /etc/ansible/hosts. It is used by the Ansible playbook to install the OpenShift environment. The inventory file describes the configuration and the topology of the OpenShift cluster. Start from a template like https://github.com/NovaOrdis/playground/blob/master/openshift/3.5/hosts and customize it to match the environment. Comments and additional documentation on some of the installation options are available here:

OpenShift Advanced Installation hosts File

If the target nodes have multiple network interfaces, and the network interface used to cluster OpenShift is NOT associated with the default route, modify the inventory file as follows:

...
openshift_set_node_ip=true

...
[nodes]
master1.openshift35.local openshift_ip=172.23.0.4 ...

Patch Ansible Logic

External DNS Server Support

OpenShift 3.5 installer did not handle 'openshift_dns_ip' properly, dnsmasq/NewrokManager runtime ignored it. In order to fix it, has to use the following:

Pre-Flight

On the support node:

As "root":

cd /tmp
rm -r tmp* yum*
rm /usr/share/ansible/openshift-ansible/playbooks/byo/config.retry

As "ansible":

ansible all -m ping
ansible nodes -m shell -a "systemctl status docker"
ansible nodes -m shell -a "docker version"
ansible nodes -m shell -a "pvs"
ansible nodes -m shell -a "vgs"
ansible nodes -m shell -a "lvs"
ansible nodes -m shell -a "nslookup something.apps.openshift35.external"
ansible nodes -m shell -a "mkdir /mnt/tmp"
ansible nodes -m shell -a "mount -t nfs support.local:/support-nfs-storage /mnt/tmp"
ansible nodes -m shell -a "hostname > /mnt/tmp/\$(hostname).txt"
ansible nodes -m shell -a "umount /mnt/tmp"

Running the Advanced Installation

ansible-playbook -vvv /usr/share/ansible/openshift-ansible/playbooks/byo/config.yml

For verbose installation use -vvv or -vvvv.

To use a different inventory file than /etc/ansible/hosts, run:

ansible-playbook -vvv -i /custom/path/to/inventory/file /usr/share/ansible/openshift-ansible/playbooks/byo/config.yml

Output of a Successful Run

PLAY RECAP *********************************************************************
infranode1.openshift35.local : ok=222  changed=60   unreachable=0    failed=0
infranode2.openshift35.local : ok=222  changed=60   unreachable=0    failed=0
lb.openshift35.local       : ok=75   changed=14   unreachable=0    failed=0
localhost                  : ok=12   changed=0    unreachable=0    failed=0
master1.openshift35.local  : ok=1033 changed=274  unreachable=0    failed=0
master2.openshift35.local  : ok=445  changed=132  unreachable=0    failed=0
master3.openshift35.local  : ok=445  changed=132  unreachable=0    failed=0
node1.openshift35.local    : ok=222  changed=60   unreachable=0    failed=0
node2.openshift35.local    : ok=222  changed=60   unreachable=0    failed=0
support.openshift35.local  : ok=77   changed=5    unreachable=0    failed=0

Verifying the Installation

OpenShift Installation Validation

Uninstallation

In case the installation procedure runs into problems, troubleshoot and before re-starting the installation procedure, uninstall:

ansible-playbook [-i /custom/path/to/inventory/file] /usr/share/ansible/openshift-ansible/playbooks/adhoc/uninstall.yml

This a relative quick method to iterate over the installation configuration and come up with a stable configuration. However, in order to install a production deployment, you must start from a clean operating system installation. If you are using virtual machines, start from a fresh image. If you are using bare metal machines, run the following on all hosts:

# yum -y remove openshift openshift-* etcd docker docker-common
# rm -rf /etc/origin /var/lib/openshift /etc/etcd \
    /var/lib/etcd /etc/sysconfig/atomic-openshift* /etc/sysconfig/docker* \
    /root/.kube/config /etc/ansible/facts.d /usr/share/openshift

Post-Install

HAProxy Load Balancer Adjustments

Configure the load balancer HAProxy on the "lb" node to log in/var/log/haproxy.log. The procedure is described here:

HAProxy Logging Configuration

Post-Install Logging Configuration

In order for the logging pods to spread evenly across the cluster, an empty node selector should be used. The "logging" project should have been created already. The empty per-project node selector can be updates as follows:

oc edit namespace logging
...
metadata:
  annotations:
    openshift.io/node-selector: ""
...

Deploy a HAProxy Router

In the case there is more than one router pod, the public application traffic, directed to the wildcard domain configured on the external DNS must be handled by a proxy that load balances between the router pods.

This load balancer must be deployed.

TODO

Provision Persistent Storage

https://docs.openshift.com/container-platform/3.5/install_config/persistent_storage/persistent_storage_nfs.html#install-config-persistent-storage-persistent-storage-nfs

TODO

Deploy the Integrated Docker Registry

TODO: isn't this automatically deployed? See "Internal Registry Configuration" section of the inventory file. How do I check?

Load Image Streams

TODO

Load Templates

TODO

Diagnostics

From a master node, as root, execute:

oadm diagnostics

Optional Post-Install

Stand-alone Registry

https://docs.openshift.com/container-platform/3.5/install_config/install/stand_alone_registry.html#registry-installation-methods
Stand-alone Registry - Concepts