Helm Concepts
Internal
Overview
Helm is a tool for managing Kubernetes packages called charts. Helm creates new charts from scratch, packages charts into chart archives (tgz) files, interacts with chart repositories where charts are stored, and finally installs and manages the release cycle of chats into an existing Kubernetes cluster. The installation process takes a chart, applies custom, operational environment-specific configuration and installs the chart into the Kubernetes cluster, creating a release.
Helm allows defining an application as a set of Kubernetes cluster components and provides mechanisms to manage these sets for their entire lifecycle.
Chart
A chart is a Helm package and a package format, the Kubernetes equivalent of a yum RPM file or a Homebrew formula. A chart contains all resource definitions necessary to deploy and run an application inside Kubernetes, arranged in a specific layout. A chart may be used to deploy a simple application, or a full web application stack with multiple dependencies, such as HTTP servers, database, caches and so on. A chart can be unpackaged, in which case it is a folder with files that follow the Helm chart rules and conventions. An unpackaged chart can be deployed directly to a cluster. A chart can also be packaged, as a tar.gz chart archive. Packaged charts can be dployed directly to the cluster.
Chart Name
A chart is identified by its name in repositories. Examples: "nginx" or "postgresql". The chart name is sometimes referred to as chart reference. The name is part of the package identification, along with chart version. For custom charts, the name of the chart is specified in the name field of the Chart.yaml metadata file. Chart names should use lower case letter and numbers, and start with a letter. Hyphens are allowed. Uppercase letter, underscores or dots should not be used in chart names. The directory that contains a chart must have the same name as the chart. For more details see Chart Names Best Practices.
Chart Versioning
Chart.yaml carries two version fields: the chart version (version) and the application version (appVersion).
Every chart must have a SemVer 2 version specified as the version field of the Chart.yaml metadata file.
Packages exposed by repositories, as well as packages generated by helm package are identified by their name and their version. For example, the chart archive of an "nginx" package whose version filed is "1.2.3" will be named:
nginx-1.2.3.tgz
Helm tools rely on the version section of the chart archive file name as release marker. The system assumes that the version number in the chart package name matches the version number in the Chart.yaml. Failure to meet this assumption will cause an error. For more details on chart version see Chart Version Numbers Best Practices.
The appVersion field is intended to carry an informal application version, not necessarily SemVer 2, and independent from the version field. This field is informational, and has no impact on chart version calculations. It is very common for the chart version and app version to be different:
NAME CHART VERSION APP VERSION DESCRIPTION
stable/postgresql 6.3.2 11.5.0 Chart for PostgreSQL, an object-relational database manag...
Chart Archive
A chart archive is a chart in a packaged (tgz) format. The chart repositories expose chart archives. helm package creates chart archives.
Chart Type
The type designates a chart as 'application' or 'library'. 'application' is the default type. A 'library' or 'helper' chart provides utilities or functions for the chart builder, it has no resource object and therefore is not installable. Example: https://github.com/helm/charts/tree/master/incubator/common. An application chart can be used as a library chart. This is enabled by setting the type to 'library'. The chart will then be rendered as a library chart where all utilities and functions can be leveraged. All resource objects of the chart will not be rendered.
Chart Installation
Charts are installed into a target Kubernetes cluster and turned into releases with:
helm install
The installation is an asynchronous process, the Helm client does not wait until all resources are running before it exits, this is because charts may require large Docker images that take long to install in the cluster. Without additional input, a chart will be installed with the default configuration, but custom configuration changes can be applied during the installation process.
The default option for the helm install command is to install from the default repository. However, the chart may come from other sources: a different repository, a local file, an unpacked chart directory or a URL.
Resource Installation and De-Installation Order
Chart Layout
This section describes a typical chart directory tree. The top level directory is the chart name, without the version information.
archaeopteryx │ ├─ Chart.yaml ├─ values.yaml ├─ requirements.yaml ├─ requirements.lock ├─ LICENSE ├─ README.md ├─ .helmignore ├─ charts └─ templates | ├─ NOTES.txt ├─ _helpers.tpl ├─ deployment.yaml ├─ service.yaml | ... └─ tests
charts/ Directory
The 'charts' directory contains any charts upon which this chart depends. The content of the directory can either manually managed, or it can be updated dynamically for dependencies declared in requirements.yaml. A dependency can be either a chart archive or an unpacked chart directory. If the name of the dependency, either file or directory, starts with '_' or '.', the dependency will be ignored by the chart loader.
templates/ Directory
Developing Custom Charts
The development of a custom chart could start with helm create, which is a command that creates a standard chart directory layout along with some common files typically used in a chart. The command provides just a basic example and is not meant to cover all Kubernetes resources. While a chart is being developed, the syntactic consistency can be checked with helm lint. Then the chart is ready for delivery, it can be packaged with helm package.
Chart Operations
Configuration
Dependencies
Repository
Templates
Release
A release is a running instance of a chart, to which a specific config was applied. Whenever a chart is installed, a new release is created. One chart can be installed multiple times into the same cluster, and each can be independently managed and upgraded. Each release has its own release name.
When a new version of a chart is released, or when the configuration of a release must be changes, the release can be upgraded with helm upgrade. Helm tries to perform the least invasive upgrade, and only upgraded things that changed since the last release. If something fails during the upgrade, a rollback can be performed with helm rollback.
Releases can be of course uninstalled with helm uninstall. Helm keeps a history of deleted releases, which can be retrieved with helm list --deleted.
Releases are namespace-scoped. There could be two releases with the same name, but in two different namespaces.
Release Name
If not specified, release names are generated (e.g. "happy-panda"). To specify a release name, use helm install --name. Helm keeps records of deleted releases, so a release name first used by a deleted release cannot be re-used (unless --replace is used). The release name is available in templates as a built-in object:
{{ .Release.Name }}
Many charts are configured so Kubernetes resources created during a Helm installation carry a "release" label with the value set to the release name.
Release Revision
A release version (revision) is incremental. Every time an install, upgrade or rollback happens, the revision number is incremented by 1, and the first revision is always 1. The revision numbers for a certain release can be inspected with helm history. A release revision can be used during a rollback. The release revision is available in templates as a built-in object:
{{ .Release.Revision }}
Release Status
Release Marker
The package version is included in the release marker.
Release Lifecycle
Release Operations
- helm install
- helm get manifest - display the manifest content that was posted to the server as part of the installation process.
- helm list - display currently deployed releases.
- helm history
- helm status
- helm upgrade
- helm rollback
- helm uninstall
Runtime
The Helm Client
The Helm client is a command-line client for end users. The client is responsible for managing charts. It helps with local chart development, manages the interaction with chart repositories and interacts with the Tiller server. The interaction with the server consists in installing charts and providing a CLI for the release life cycle (the server manages the releases).
The Tiller Server
Tiller has been removed in Helm 3.
The Tiller server is an in-cluster component that interacts with the Helm client and interfaces with the Kubernetes API Server.
The server is responsible for managing releases. It does that by handling client requests, combining a chart and the configuration to build a release, installing charts and then tracking their subsequent release, then upgrading and uninstalling charts.
Tiller stores release information in ConfigMaps in the namespace where it is running. It could be configured to use a storage backend that uses Secrets for storing release information. More here. It could also be configured to use an SQL storage backend for storing release information. More here.
Hooks
Security
Plugins
Tests
TODO: https://helm.sh/docs/developing_charts/#chart-tests
Labels
Most charts configure the Kubernetes resources created by them to carry a "release" label, whose value is the release name. This convention could be useful in providing a mechanism to identify these resources using label selectors.